DJI Matrices 100 - Mission Planner “Heads-up Display (HUD)” does not display any values in the UI?
I am having DJI Matrices 100 Quadcopter. I connected the DJI Matrices 100 Quadcopter to Mission planner (version 1.3.586) through UDP connection.
But after I connected to Mission Planner, there is a pop-up windows shows that “Getting Params” mode. The pop-up windows is always shows up without any progress forever. Looks Like it cannot be able to retrieve the parameters.
Only option I have is to cancel this process or let it run hours on end. After cancel the “Getting Params” pop-up windows, the Mission Planner “Heads-up Display (HUD)” does not display any values in the UI?
If I run the Simulation, still the HUB does not display any values. Looks like it is related “Getting Params” pop-up windows issue?
Base on the log message, the Mission planner sending param request message PARAM_REQUEST_READ(#20) with PARAM_REQUEST_LIST(#21) to DJI drone the mavlink protocol . The DJI Drone needs to parameter values through PARAM_VALUE ( #22 ) to the Mission planner. But the DJI Drone does not reply with parameter values . Then the Mission planner keep on sending the PARAM_REQUEST_READ(#20) to the DJI Drone. That is reason the “Getting Params” pop-up windows is always shown in the Mission planner.
Here is sample log message
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 32 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 30 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 33 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
- What are the parameters need to send to MP?
- Would helps to provide any example code ?
dji-sdk
edited Nov 15 '18 at 6:28
tkausl
9,11812343
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
add a comment |
I am having DJI Matrices 100 Quadcopter. I connected the DJI Matrices 100 Quadcopter to Mission planner (version 1.3.586) through UDP connection.
But after I connected to Mission Planner, there is a pop-up windows shows that “Getting Params” mode. The pop-up windows is always shows up without any progress forever. Looks Like it cannot be able to retrieve the parameters.
Only option I have is to cancel this process or let it run hours on end. After cancel the “Getting Params” pop-up windows, the Mission Planner “Heads-up Display (HUD)” does not display any values in the UI?
If I run the Simulation, still the HUB does not display any values. Looks like it is related “Getting Params” pop-up windows issue?
Base on the log message, the Mission planner sending param request message PARAM_REQUEST_READ(#20) with PARAM_REQUEST_LIST(#21) to DJI drone the mavlink protocol . The DJI Drone needs to parameter values through PARAM_VALUE ( #22 ) to the Mission planner. But the DJI Drone does not reply with parameter values . Then the Mission planner keep on sending the PARAM_REQUEST_READ(#20) to the DJI Drone. That is reason the “Getting Params” pop-up windows is always shown in the Mission planner.
Here is sample log message
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 32 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 30 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 33 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
- What are the parameters need to send to MP?
- Would helps to provide any example code ?
dji-sdk
edited Nov 15 '18 at 6:28
tkausl
9,11812343
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
add a comment |
I am having DJI Matrices 100 Quadcopter. I connected the DJI Matrices 100 Quadcopter to Mission planner (version 1.3.586) through UDP connection.
But after I connected to Mission Planner, there is a pop-up windows shows that “Getting Params” mode. The pop-up windows is always shows up without any progress forever. Looks Like it cannot be able to retrieve the parameters.
Only option I have is to cancel this process or let it run hours on end. After cancel the “Getting Params” pop-up windows, the Mission Planner “Heads-up Display (HUD)” does not display any values in the UI?
If I run the Simulation, still the HUB does not display any values. Looks like it is related “Getting Params” pop-up windows issue?
Base on the log message, the Mission planner sending param request message PARAM_REQUEST_READ(#20) with PARAM_REQUEST_LIST(#21) to DJI drone the mavlink protocol . The DJI Drone needs to parameter values through PARAM_VALUE ( #22 ) to the Mission planner. But the DJI Drone does not reply with parameter values . Then the Mission planner keep on sending the PARAM_REQUEST_READ(#20) to the DJI Drone. That is reason the “Getting Params” pop-up windows is always shown in the Mission planner.
Here is sample log message
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 32 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 30 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 33 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
- What are the parameters need to send to MP?
- Would helps to provide any example code ?
dji-sdk
edited Nov 15 '18 at 6:28
tkausl
9,11812343
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
I am having DJI Matrices 100 Quadcopter. I connected the DJI Matrices 100 Quadcopter to Mission planner (version 1.3.586) through UDP connection.
But after I connected to Mission Planner, there is a pop-up windows shows that “Getting Params” mode. The pop-up windows is always shows up without any progress forever. Looks Like it cannot be able to retrieve the parameters.
Only option I have is to cancel this process or let it run hours on end. After cancel the “Getting Params” pop-up windows, the Mission Planner “Heads-up Display (HUD)” does not display any values in the UI?
If I run the Simulation, still the HUB does not display any values. Looks like it is related “Getting Params” pop-up windows issue?
Base on the log message, the Mission planner sending param request message PARAM_REQUEST_READ(#20) with PARAM_REQUEST_LIST(#21) to DJI drone the mavlink protocol . The DJI Drone needs to parameter values through PARAM_VALUE ( #22 ) to the Mission planner. But the DJI Drone does not reply with parameter values . Then the Mission planner keep on sending the PARAM_REQUEST_READ(#20) to the DJI Drone. That is reason the “Getting Params” pop-up windows is always shown in the Mission planner.
Here is sample log message
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 32 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 30 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, sendEncodedMsgToMng, 319: ...succeed in sending encoded message with id 33 to Manager with index 0.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
[dji2mav] [TRACE] /home/ubuntu/catkin_ws/src/onboard-sdk-ros/dji_sdk_dji2mav/include/dji_sdk_dji2mav/mavHandler.h, recvFromMng, 408: Totally 1 messages are received from Manager of index 0. Message id 20.
- What are the parameters need to send to MP?
- Would helps to provide any example code ?
dji-sdk
dji-sdk
edited Nov 15 '18 at 6:28
tkausl
9,11812343
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
edited Nov 15 '18 at 6:28
tkausl
9,11812343
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
edited Nov 15 '18 at 6:28
tkausl
9,11812343
edited Nov 15 '18 at 6:28
tkausl
9,11812343
edited Nov 15 '18 at 6:28
tkausl
9,11812343
9,11812343
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
asked Sep 26 '18 at 10:14
Nagajothi NagappanNagajothi Nagappan
61
61
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ifUsing("editor", function ()
StackExchange.using("externalEditor", function ()
StackExchange.using("snippets", function ()
StackExchange.snippets.init();
);
);
, "code-snippets");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "1"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f52515321%2fdji-matrices-100-mission-planner-heads-up-display-hud-does-not-display-any%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f52515321%2fdji-matrices-100-mission-planner-heads-up-display-hud-does-not-display-any%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
