Auth0 ADFS - Can't Find Federation Metadata URL - Next Steps
This post became much longer than anticipated, TLDR: Where is my ASFS Federation Metadata located on my server? My overall task to the setup a test ADFS server in order to integrate our current application with ADFS
Hello, I'm trying to integrate our application with ADFS (it's a WPF application with a NodeJS backend), and I'm testing out Auth0 for this job (but if there are other simple solutions, I would be open to that as well - I've found no good guides so far ): espeically as a developer with no AD experience).
Regardless, I think I've set up a single server AD FS environment (locally as server1.local - with AD CS, AD DS and AD FS and that same server is the domain controller/DNS server) and set up an Auth0 relying party using this guide:
https://auth0.com/docs/connections/enterprise/adfs
In the next steps part, it says: try these quickstart guides. So I've downloaded the Angular2 quick start example project to test. But when I go to the enterprise connections and try to set up an ADFS connection, it asks for a ADFS URL
You can either provide the ADFS URL or upload the federation metadata file.
But I can't seem to find my ADFS URL. Not only that, my server is local, so it wouldn't be able to use my URL anyways right? I can just upload the metadata instead?
I've tried going to https://server1.local/federationmetadata/2007-06/federationmetadata.xml and https://127.0.0.1/FederationMetadata/2007-06/FederationMetadata.xml and https://localhost/FederationMetadata/2007-06/FederationMetadata.xml which under endpoints that's the one that shows, but ie says:
Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://server1.local again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4 (link for the details), which is not considered secure. Please contact your site administrator.
I've enabled TLS 1.0, 1.1 and 1.2 and this still doesn't seem to give me my metadata. I've also tried that URL on Chrome and it gives a generic "This site can't be reached"
How do I get my metadata?
oauth active-directory saml adfs auth0
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
add a comment |
This post became much longer than anticipated, TLDR: Where is my ASFS Federation Metadata located on my server? My overall task to the setup a test ADFS server in order to integrate our current application with ADFS
Hello, I'm trying to integrate our application with ADFS (it's a WPF application with a NodeJS backend), and I'm testing out Auth0 for this job (but if there are other simple solutions, I would be open to that as well - I've found no good guides so far ): espeically as a developer with no AD experience).
Regardless, I think I've set up a single server AD FS environment (locally as server1.local - with AD CS, AD DS and AD FS and that same server is the domain controller/DNS server) and set up an Auth0 relying party using this guide:
https://auth0.com/docs/connections/enterprise/adfs
In the next steps part, it says: try these quickstart guides. So I've downloaded the Angular2 quick start example project to test. But when I go to the enterprise connections and try to set up an ADFS connection, it asks for a ADFS URL
You can either provide the ADFS URL or upload the federation metadata file.
But I can't seem to find my ADFS URL. Not only that, my server is local, so it wouldn't be able to use my URL anyways right? I can just upload the metadata instead?
I've tried going to https://server1.local/federationmetadata/2007-06/federationmetadata.xml and https://127.0.0.1/FederationMetadata/2007-06/FederationMetadata.xml and https://localhost/FederationMetadata/2007-06/FederationMetadata.xml which under endpoints that's the one that shows, but ie says:
Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://server1.local again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4 (link for the details), which is not considered secure. Please contact your site administrator.
I've enabled TLS 1.0, 1.1 and 1.2 and this still doesn't seem to give me my metadata. I've also tried that URL on Chrome and it gives a generic "This site can't be reached"
How do I get my metadata?
oauth active-directory saml adfs auth0
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
add a comment |
This post became much longer than anticipated, TLDR: Where is my ASFS Federation Metadata located on my server? My overall task to the setup a test ADFS server in order to integrate our current application with ADFS
Hello, I'm trying to integrate our application with ADFS (it's a WPF application with a NodeJS backend), and I'm testing out Auth0 for this job (but if there are other simple solutions, I would be open to that as well - I've found no good guides so far ): espeically as a developer with no AD experience).
Regardless, I think I've set up a single server AD FS environment (locally as server1.local - with AD CS, AD DS and AD FS and that same server is the domain controller/DNS server) and set up an Auth0 relying party using this guide:
https://auth0.com/docs/connections/enterprise/adfs
In the next steps part, it says: try these quickstart guides. So I've downloaded the Angular2 quick start example project to test. But when I go to the enterprise connections and try to set up an ADFS connection, it asks for a ADFS URL
You can either provide the ADFS URL or upload the federation metadata file.
But I can't seem to find my ADFS URL. Not only that, my server is local, so it wouldn't be able to use my URL anyways right? I can just upload the metadata instead?
I've tried going to https://server1.local/federationmetadata/2007-06/federationmetadata.xml and https://127.0.0.1/FederationMetadata/2007-06/FederationMetadata.xml and https://localhost/FederationMetadata/2007-06/FederationMetadata.xml which under endpoints that's the one that shows, but ie says:
Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://server1.local again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4 (link for the details), which is not considered secure. Please contact your site administrator.
I've enabled TLS 1.0, 1.1 and 1.2 and this still doesn't seem to give me my metadata. I've also tried that URL on Chrome and it gives a generic "This site can't be reached"
How do I get my metadata?
oauth active-directory saml adfs auth0
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
This post became much longer than anticipated, TLDR: Where is my ASFS Federation Metadata located on my server? My overall task to the setup a test ADFS server in order to integrate our current application with ADFS
Hello, I'm trying to integrate our application with ADFS (it's a WPF application with a NodeJS backend), and I'm testing out Auth0 for this job (but if there are other simple solutions, I would be open to that as well - I've found no good guides so far ): espeically as a developer with no AD experience).
Regardless, I think I've set up a single server AD FS environment (locally as server1.local - with AD CS, AD DS and AD FS and that same server is the domain controller/DNS server) and set up an Auth0 relying party using this guide:
https://auth0.com/docs/connections/enterprise/adfs
In the next steps part, it says: try these quickstart guides. So I've downloaded the Angular2 quick start example project to test. But when I go to the enterprise connections and try to set up an ADFS connection, it asks for a ADFS URL
You can either provide the ADFS URL or upload the federation metadata file.
But I can't seem to find my ADFS URL. Not only that, my server is local, so it wouldn't be able to use my URL anyways right? I can just upload the metadata instead?
I've tried going to https://server1.local/federationmetadata/2007-06/federationmetadata.xml and https://127.0.0.1/FederationMetadata/2007-06/FederationMetadata.xml and https://localhost/FederationMetadata/2007-06/FederationMetadata.xml which under endpoints that's the one that shows, but ie says:
Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://server1.local again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4 (link for the details), which is not considered secure. Please contact your site administrator.
I've enabled TLS 1.0, 1.1 and 1.2 and this still doesn't seem to give me my metadata. I've also tried that URL on Chrome and it gives a generic "This site can't be reached"
How do I get my metadata?
oauth active-directory saml adfs auth0
oauth active-directory saml adfs auth0
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
edited Nov 15 '18 at 3:03
Thomas Zhang
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
asked Nov 15 '18 at 2:38
Thomas ZhangThomas Zhang
11210
11210
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
In the ADFS configuration, look for what you configured as your federation service name.
Use this in the URL.
https://federation service name/federationmetadata/2007-06/federationmetadata.xml
BTW the federation service name should not be the FQDN of the server.
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
StackExchange.using("externalEditor", function ()
StackExchange.using("snippets", function ()
StackExchange.snippets.init();
);
);
, "code-snippets");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "1"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53311633%2fauth0-adfs-cant-find-federation-metadata-url-next-steps%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
In the ADFS configuration, look for what you configured as your federation service name.
Use this in the URL.
https://federation service name/federationmetadata/2007-06/federationmetadata.xml
BTW the federation service name should not be the FQDN of the server.
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
add a comment |
In the ADFS configuration, look for what you configured as your federation service name.
Use this in the URL.
https://federation service name/federationmetadata/2007-06/federationmetadata.xml
BTW the federation service name should not be the FQDN of the server.
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
add a comment |
In the ADFS configuration, look for what you configured as your federation service name.
Use this in the URL.
https://federation service name/federationmetadata/2007-06/federationmetadata.xml
BTW the federation service name should not be the FQDN of the server.
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
In the ADFS configuration, look for what you configured as your federation service name.
Use this in the URL.
https://federation service name/federationmetadata/2007-06/federationmetadata.xml
BTW the federation service name should not be the FQDN of the server.
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
answered Nov 15 '18 at 18:28
nzpcmadnzpcmad
28.6k2895146
28.6k2895146
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53311633%2fauth0-adfs-cant-find-federation-metadata-url-next-steps%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
